Mitus 206LA
600W + 300W - 134dB SPL - Active precision coverage vertical array
Ideal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage to multiple cabinet full sized line array, the MITUS 206LA maybe used also in outdoor applications where
the system is not directly exposed to the elements.
-
2 x 6.5"(165 mm) B&C neodymium woofers with 1.7"(44 mm) coil
-
1.4"(36 mm) exit B&C neodymium driver with 2.5"(64 mm) coil
-
Frequency response from 68Hz to 20KHz
-
Latest class D built-in amplifiers, 600Wrms to the LF and 300Wrms to the HF with switch mode power supply
-
DSP on-board with 8 presets, +/- 5db HF level control for accurate amplitude shading
-
Control panel with XLR input and link, volume, presets, HF level, HP-filter, ground-lift
-
100° horizontal waveguide with very low distortion and near flat wavefront up to 18Khz
-
High impact polypropylene gas-injected enclosure with integrated rigging hardware adjustable with 0° to 10° angle between cabinets at 2° step
-
Wide range of hardware accessories for flying and ground stacked configurations
-
Very lightweight, only 14Kg
Specifications
|
|
Configuration way |
2 way
|
|
Built-in amplifier cont. rms LF/HF |
400W / 200W
|
|
Built-in amplifier max. rms LF/HF |
600W / 300W
|
|
Built-in amplifier max. peak LF/HF |
1200W / 600W
|
|
Frequency response |
68Hz ~ 20kHz @ -6dB
|
|
Low frequency woofer |
2 x 6.5 inch - 1.7 coil - neodymium
|
|
High frequency driver |
1 x 1.4 inch - 2.5 coil - neodymium
|
|
Maximum SPL cont/peak |
125dB / 134 dB
|
|
Dispersion |
100°H x 10°V max dependant
upon n of element
|
|
Input impedance |
22,000 ohm
|
|
Crossover frequency |
1,200 Hz
|
|
AC Power requirments |
640 VA
|
|
Input connectors |
XLR with loop
|
|
Power cord |
5 m
|
|
Net dimensions (WxHxD) |
574 x 220 x 383 (mm)
|
|
Net weight |
14 kg
|
|
|
